MPL3115A2 Altitude/Pressure Sensor Breakout
==================

[![MPL3115A2 Altitude/Pressure Sensor Breakout](https://dlnmh9ip6v2uc.cloudfront.net/images/products/1/1/0/8/4/11084-01_medium.jpg)  
*MPL3115A2 Altitude/Pressure Sensor Breakout (SEN-11084)*](https://www.sparkfun.com/products/11084)

The MPL3115A2 is a MEMS pressure sensor that provides Altitude data to within 30cm (with oversampling enabled). The sensor outputs are digitized by a high resolution 24-bit ADC and transmitted over I2C, meaning it's easy to interface with most controllers.

Repository Contents
-------------------

* **/examples** - Example sketches for the library (.ino). Run these from the Arduino IDE.
* **src** - Source files for the library. 
* **keywords.txt** - Keywords from this library that will be highlighted in the Arduino IDE. 
* **library.properties** - General library properties for the Arduino package manager. 

Documentation
--------------

* **[Installing an Arduino Library Guide](https://learn.sparkfun.com/tutorials/installing-an-arduino-library)** - Basic information on how to install an Arduino library.
* **[Product Repository](https://github.com/sparkfun/MPL3115A2_Breakout)** - Main repository (including hardware files) for the MPL3115A2 altitude/pressure sensor breakout.
* **[Hookup Guide](https://learn.sparkfun.com/tutorials/mpl3115a2-pressure-sensor-hookup-guide)** - Basic hookup guide for the MPL3115A2 altitude/pressure sensor breakout.

License Information
-------------------

This product is _**open source**_! 

The **code** is beerware; if you see me (or any other SparkFun employee) at the local, and you've found our code helpful, please buy us a round!

Please use, reuse, and modify these files as you see fit. Please maintain attribution to SparkFun Electronics and release anything derivative under the same license.

Distributed as-is; no warranty is given.

- Your friends at SparkFun.